该词条未找到_海词词典

您要查找的是不是：

A heat transfer model consists of the thermal balance of inside air, floor, plants and ventilation effect. 热传模式之项目包括内部空气之热传量，通风量，地面与植物体之热平衡。
To consider the effect of wall heat transfer, a wall heat transfer model is added into the HCT code. 为考虑壁面传热的影响，在HCT程序中增加了壁面传热子模型。
The mathematical heat transfer model for conveying and insulating process of CC -slab in HCR was established. 建立了连铸板坯辊道输送和保温坑保温过程传热数学模型,并用实测数据对计算结果进行了验证。
The two dimensional heat transfer model is used to estimate temperature of hot metal during transport from BF to BOF. 利用二维传热模型对宝钢铁水从高炉到炼钢输送过程中的温度变化进行了仿真模拟计算。
A1-D flow discharge model for coolant blow-down and 1-D heat transfer model for afterheat removal aiming at TBM LOCA analysis are developed. 并为中国氦冷固体增殖实验包层模块冷却剂丧失事故(LOCA)分析开发了一维喷放和余热排除计算模型。
A dynamic heat transfer model based on the lumped parameter method was developed for cooling system of vehicle internal combustion engine. 提出了一个基于集总参数+法的车用内燃机冷却系统动态传热模型。
Heat transfer model on the thermal control groupware of thrust chamber for orbit SN propellant hydrazine thruster is established. 摘要针对5N单组元肼推力器，建立了在轨运行过程中推力室热控组件的传热模型；
It was reasonable in practice that melting temperatures and viscosities of fluxes were calculated by heat transfer model,which laid a theoretical foundation for research on flux. 利用数值仿真建立的传热数学模型确定的保护渣熔化温度，粘度被实践证明是合理的，这为保护渣的研究提供了理论依据。
This paper based on the interaction theory mechanism of laser-biotissue,the 2-D heat transfer model of laser-irradiated invitro human skin-tissue was established. 基于激光与生物组织相互作用的机理,建立了强激光辐照离体人皮肤组织的二维传热模型。
The heat transfer model of this paper consists 4 components: gas convection, particle unsteady heat conduction, particle radiation and flue-gas radiation. 该模型由四部分组成：气相对流传热，颗粒非稳态导热传热，颗粒辐射传热和烟气三原子辐射传热。
The heat transfer model of the solidification process of slab in CCM was used to predict the change of the thickness of the solidificated shell and the temperature of slabs out of CCM. 用连铸坯凝固过程传热模型模拟了热送热装工艺中不同工况下铸坯凝固壳厚度和铸坯出连铸机的温度变化。
A flow and heat transfer model of a vehicle cooling system has been modeled in order to predict its characteristics. 摘要根据传热学和流体力学原理，对车辆冷却系统建立数学模型，并进行了仿真计算。
A reaction heat transfer model of the radiation chamber in an industrial scale cracking furnace has been proposed for production of vinyl chloride monomer (VCM) from 1,2 dichloroethane (EDC). 建立了管式裂解炉的反应传热模型 ,以描述二氯乙烷裂解制氯乙烯单体的工业过程。
Based on the above study, a three-dimensioned unsteady heat transfer model of U-type UCHE was established, which took different thermal properties of soil layers and groundwater flow into account. 在上述研究基础上,围绕埋地换热器与周围土壤的换热过程,考虑沿深度方向土壤层之间热物性的不同以及地下水流动等因素,建立了垂直U型埋地换热器三维非稳态数值传热模型。
Based on the analysis of heat transfer mechanism in the bell-type annealing furnace with HPH, a two-dimensional heat transfer model for steel coils was built to track on-line temperatures. 摘要在分析全氢罩式退火炉钢卷退火过程传热机理的基础上，建立了适用于钢卷温度在线跟踪的二维传热数学模型，着重讨论了循环气体与钢卷之间对流换热的计算方法。
An unsteady heat transfer model was sot up and solved by numerical solution for the heat transfer characteristic of U-pipe heat exchanger and the interaction of the two pipe legs of the GSHPs. 针对U型管埋地换热器的传热特点,考虑了两管脚之间的相互影响,建立起非稳态传热模型。
Based onthe analysis of heat transfer mechanism in the bell-type annealing furnace with HPH, a two-dimensionalheat transfer model for steel coils was built to track on-line temperatures. 在分析全氢罩式退火炉钢卷退火过程传热机理的基础上,建立了适用于钢卷温度在线跟踪的二维传热数学模型,着重讨论了循环气体与钢卷之间对流换热的计算方法。
Based on flow and heat transfer model of discrete and continuous phases, three-dimensional numerical simulation of flow and heat transfer in Venturi tube was studied on FLUENT platform. 由于文氏管内部的流动与传热较为复杂，基于离散相和连续相流动与传热模型，在FLUENT平台上，对文氏管内部的流动与传热过程进行了三维数值模拟；
One improved heat transfer model for conventional linear source theory appeared by considering the variational heat flow.With this model, the applied range of the linear source model was enlarged. 通过考虑在变热流情况下的传热，在传统的常热流线源模型上发展出了一种改进的变热流线源模型，从而扩展了线源模型的应用范围。