该词条未找到_海词词典

您要查找的是不是：

gasification latent heat 气化潜热
A similar definition holds good for latent heat of vaporization. 气化潜热的定义与此雷同。
The half-year cycle of latent heat flux exists in the Xisha area, with the maximum appearing in winter. 西沙海面潜热通量存在半年周期特征，极大值也是出现在冬半年。
The Effect of Latent Heat Release on the Evolution of a Warm Occluded Thermal Structure. 潜热释放对热固囚热结构的作用。
The results show that vorticity advection, thermal advection and latent heat release made great contribution to the development of the depression. 中低层的温度平流、降水凝结释放潜热维持上升运动，是低压进一步发展的有利条件。
Heat arriving at the interface is immediately converted to latent heat of vaporization (the water boils). 到达接口的热立刻被转换成潜在汽化热(水煮沸)。
The specific latent heat is the difference in enthalpies of the substance in its two states. 比潜热是物质在两种状态下的焓差。
In this case latent heating and radiation cooling are comparable. 在这种场合，潜热加热和辐射冷却数值相当。
The low-temperature blown gas discharged from the fixed-bed intermittent gasifier contains high latent heat. 固定层间歇式煤气发生炉排放的低温吹风气具有较高的潜热。
Thermal energy storage are the technologies that make use of latent heat stored by Phase Change Materials (PCMs). 蓄热技术利用相变材料（Phase Change Material，PCM）的相变热来储存热能。
The results show that melting latent heat of the cool storage material is 149kJ/kg, phase change tempera. 通过实验方法研究了空调蓄冷材料的相变温度、相变潜热和比热等热学性能。
The model couples temperature with latent heat in its calculation. quenching process of a T8 ... 用此模型对T8钢淬火过程进行计算机模拟，计算结果令人满意。
The latent heat in the PCIM can largely increase the heat capacity of the insulation material. 当环境温度低于一定值时，相变材料有液态凝结为固态，释放热量；
Macro and micro models were coupled using iterative scheme through treatment of latent heat. 宏/微观模型以潜热的处理为纽带,采用先进的迭代方法进行耦合;
Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization. 热转移则主要包括了三种形式，即传导、对流和汽化潜热。
A sizeable proportion of the solar energy absorbed at the ocean surface is converted not into sensible heat but into latent heat. 海洋表面所吸收的太阳能相当大的部分不是转换成潜热，而是转换成感热。
It Is necessary to include as a heat source In the thermodynamic energy equation at erm which represems the timerate of release of the latent heat of condensation of water vapor. 译为:有必要把代表水汽凝结潜热释放的随时间变化率的一项作为热源项包括在热力学能量方程中。
A new method for measuring the latent heat of vapourization of water is introduced. The principle of this method is discussed. 介绍了一种测定水的汽化热的实验方法，并对其测量原理作了讨论.;该方法测量结果准确，方法简便
The finite model of injection molded parts with microstructure region considering latent heat can approximatively forecast the cavity temperature. 采用考虑结晶潜热的微结构件注射成型有限元模型能较准确地预测制品内部温度场分布。
This is arrived at by multiplying the condensate rating by the appropriate Latent Heat Value and dividing by 1,000 to determine MBH. 可以将额定冷凝值乘以适当的潜热值，然后除以1000即可得到MBH。