您要查找的是不是：
- fusion casting mold 熔铸模
- The workers are teeming melten metal into the casting mold. 工人们正把熔化的金属注入铸型模中。
- A casting mold for metal. 铸模制金属的模具
- Abstract ：The development of EMBr in slab continuous casting mold，its current research conditions and its effect in metallurgy were reviewed. 文 摘： 总结了板坯连铸结晶器中电磁制动技术的发展、研究状况以及冶金效果。
- The electrohydraulic servo vibration system of casting mold is introduced,its mathematic model set up,computer simulation and site operation conducted. 介绍了电液伺服驱动连铸结晶器振动系统,建立了系统的数学模型,进行了计算机仿真和现场运行。
- The computer control system and its software are introduced for continuous casting mold oscillation driven by hydraulic servo. 介绍液压伺服驱动的连铸结晶器振动计算机控制系统及其控制软件。
- Non-sinusoidal oscillation of continuous casting mold is one of the key technologies for high speed casting with high quality. 结晶器非正弦振动是实施高拉速连铸和提高铸坯质量的关键技术。
- Head-cylinder and Intake of non-Ferrous metal, Pouring machine for gravity die, Cold-box machine, Core-Shooting machine, Casting Mold, Exports'casting etc. 轿东发动机缸盖、进气管、冷芯机、射芯机、铸造模具、出口铸件等。
- Microstructural changes of a fusion cast Al2O3-ZrO2-SiO2 (AZS) block taken from the side wall of a glass tank furnace were studied by scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. 借助扫描电镜、能谱仪和X射线衍射研究了玻璃熔窑池壁用熔铸Al2O3?ZrO2?SiO2(AZS)大砖蚀变后残砖的显微结构变化。 在玻璃液?
- The large, complex and irregular investment casting mold wassuccessfully designed by property arrange technology hole for core cleaning and use combinative core. 通过开设适当的出芯工艺孔，利用组合型芯，成功地设计出了大型、复杂、不规则熔模铸件模具。
- The interface between glass in R_2O-BaO-SiO_2 system and fusion cast Al_2O_3-ZrO_2-SiO_2 refractory after high-temperature reaction has been investigated by the electron probe microanalyser(EPMA). 本文运用电子探针研究了以R_2O-BaO-SiO_2为基础的玻璃与电熔Al_2O_3-ZrO_2-SiO_2耐火材料高温作用时形成的界面;
- A mathematical model has been developed for three-dimensional heat transfer to analyze the temperature field on the cooling copper plate of the thinslab continuous casting mold. 本文描述了连铸机结晶器铜板温度场数学模型,给出了不同工况下铜板温度分布的数值 模拟结果。
- In this paper,the author has concisely expounded the latest development in Continuous casting mold fluxes and proposed some opinions on future research work. 综述了近三年国内外连铸保护渣技术的最新发展，探讨了今后研究工作的方向。
- Proportion of Metal Loss in Fusion Casting Process 金属在熔炼过程中的损耗计算
- He is cast in his father's mold. 他长得和他父亲一模一样。
- Our products mainly include injection blowing medical bottle mold, lid mold, rubber mold, middle or large mold, casting mold, plastic mold for America Weiton, Zoma, Italy, Weida Corporation, etc. 专业生产医药包装注吹瓶、盖模，为美国威顿、宙马、意大利、维达注吹设备配备模具，并从事中大型模具，压铸模、塑料模、橡胶模等设计制造。
- Application of Z-Type of Fusion Cast Checker Z形电熔格子砖实用性浅析
- Surface treatments on continuous casting mold (CCM) will greatly increase its service life and electroplating is the leading surface technology in the field of mold surface treatment. 摘要对结晶器进行表面处理可以欠大提高其使用寿命，电镀技术是结晶器表面处理领域的主要表面技术。
- MICROSTRUCTURES OF CORRODED FUSION CAST AZS BLOCK 熔铸AZS砖溶蚀的显微结构
- The paper introduces the test-bed of electro-hydraulic continuous casting mold system. It also presents the non-sinusoidal oscillation waveform which is constructed by lines and arcs. 文章介绍了电液连铸结晶器非正弦振动系统试验台;同时介绍采用直线和圆弧构造的非正弦振动波形.
