您要查找的是不是:
- foundry CAE technology 铸造CAE
- Foundry CAE is applied in simulating a gear casting solidification and the casting technique is improved based on the simulation results. 利用铸造CAE方法研究齿轮铸件的凝固过程,基于模拟结果对铸造工艺进行了改进。
- The concrete application of CAE technology in the injection molding is illustrated by the engineering cases. 用工程案例说明注射成型中计算机辅助工程(CAE)技术的具体应用。
- It systematically summed up the development of CAE technology for extrusion dies from five aspects. 系统地将挤出模CAE技术的发展从五个方面给予了总结。
- During the mold design, gating system and cooling system designed and optimized with CAE technology. 在模具设计过程中充分CAE技术来优化设计浇注系统和冷却系统。
- Companies rely on CAD / CAM / CAE technology products, mold development and design. 公司依托CAD/CAM/CAE技术进行产品、模具的开发与设计。
- Application of OpenGL Technology in Pre-processing Module of Foundry CAE System OpenGL技术在铸造CAE前处理模块中的应用
- Drawing Technology with DIB in Post-process Module of Foundry CAE System 铸造CAE系统后置处理模块中的DIB绘图技术
- It is the inevitable trend of development that the plastic mold is designed not only by CAD technology but also by CAE technology. 塑料模具的设计不但采用CAD技术,而且还要采用CAE技术,这是发展的必然趋势。
- The appearance of the CAE technology offered a new way for optimizing the mould design and for ensuring the mould's op... 从技术及应用角度出发,系统地介绍了塑料模CAE技术的概况、内涵及发展趋势。
- CAD technology and CAE technology are introduced . The application of CAD/CAE technology in plastic mold is roundly recounted. 通过对计算机辅助设计 (CAD)、计算机辅助工程 (CAE)技术的介绍 ,较全面地阐述了CAD/CAE技术在塑料模具设计中的应用。
- The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system. 三轴转台框架系统的三维模拟与分析,采用CAE技术,使用PATRAN有限元软件。
- The system provides castings simulation services through network and improves the application of the CAE technology in the foundries. 系统通过网络提供铸件试算模拟服务,推动CAE技术在铸造企业中的应用。
- Now CAE technology has been widely applied and researched overseas, butcorrespondingly it is developed lately, which in it"s infancy at home. 目前,CAE技术在国外已经得到广泛的应用和研究,国内在这方面开发比较晚,尚未成熟。
- This paper is researching and analyzing drilling stem (<100 meter) in engineering by modeling test on TH50C-T drilling machine and software ANSYS on FEM of CAE technology. 本文以100m以内工程钻进的钻杆柱为研究对象,以TH50C-T钻机为实验平台,利用建模试验与CAE有限元仿真软件ANSYS进行分析。
- How to set up mathematic model based on CAE technology, structural optimization and sensitivity analysis, and how to evaluate its computational results are introduced. 摘要介绍了如何基于CAE技术建立结构优化数学模型,进行灵敏度分析和优化分析,以及如何对优化解进行取舍。
- It simulated the forming process of rail fixative appliance by advanced CAE technology and found out the reason of the two defects generated during forming process. 采用先进CAE技术对铁轨防爬器的成形进行模拟,找出成形过程中产生两种缺陷的原因,并提出合理的解决方案,应用于实际生产取得良好的效果。
- As an important part of computer aided engineering (CAE), the plastic injection CAE technology is introduced in order to solve some technical problems in gas-assisted injection molding process. 注塑计算机辅助工程学(CAE)技术是CAE技术中一个重要的组成部分;介绍了目前气体辅助注塑成型工艺中的难点及CAE分析技术.
- In order to reduce the development cycle and the cost of the mold, improve the mold quality, more and more mold enterprises start to use the CAE technology to optimize the design of the mold structure. 为了缩短模具开发周期,降低模具成本及提高模具质量,越来越多的模具企业开始使用计算机辅助工程(CAE)技术进行注塑模具结构的优化设计。
- This study offered a new method to die design. By the use of the CAE technology, more feasible die geometry could be got with the help of ANSYS finite element software and then be validated and analyzed by experimentation. 此研究为机头设计提供了一种方法即:利用CAE技术,用ANSYS有限元软件进行模拟计算和分析,获得较为适宜的机头几何尺寸,然后再由试验进行分析验证。