该词条未找到_海词词典

您要查找的是不是：

Fluidization dip coating for metal 金属浸塑涂装技术
fluidization dip coating 粉末流化床浸涂法
Dip coating: Coating method in which the web is passed around a roller immersed in solution. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
PVA coated gloves for solvent resistance were obtained through dip coating. 用浸渍涂膜技术成功制备了一种耐有机溶剂的PVA涂膜手套。
Main factors of influencing photoresist thickness for dip coating is analysed in this paper. 分析了提拉法涂胶中影响胶膜厚度的主要因素，并据此确定出胶膜厚度；
Porous anatase TiO 2 nanometer thin films were prepared from alkoxide solutions containing polyethylene glycol by a dip coating technique. 锐钛矿型 Ti O2 多孔纳米薄膜可以从含聚乙二醇的钛醇盐溶胶前驱体中通过浸渍提拉法制备 ;
Pure and Pt doped ( m( Pt ):m( WO 3)=0.3%) WO 3 thin films were prepared using the sol gel process by the dip coating technique on alumina substrates. 用溶胶凝胶浸渍技术在三氧化二铝基片上制备了纯和 (m(Pt) :m(WO3 ) =0 .;3%25 )铂搀杂的三氧化钨膜
L. E. Scriven, “Physics and Applications of Dip Coating and Spin. Coating”, Mat. Res. Soc Symp. Proc., 121, p717, (1988). 黄启涵，“以溶胶凝胶法制备施受体共掺杂钽酸锶铋薄膜”，国立东华大学材料科学与工程学研究所硕士论文，(2003)。
The production of spunbonded terylen needlepunching waterproof base cloth can be completely by direct dip coating and drying. 纺粘涤纶针刺防水基胎布可在线直接进行浸胶和烘干完成。
The performance, microstructures and the failure mechanism of laminated Bi2Te3/FeSi2 prepared by dip coating using tin-based alloys as bridge materials have been investigated. 以Sn基合金为焊接材料，采用热浸焊技术制备了Bi_2Te_3/FeSi_2叠层热电材料，并系统地分析研究了叠层热电材料的性能，焊接过渡层的微观组织结构以及过渡层在热加工及模拟服役过程中的破坏机制。
The porous TiO 2 anatase thin films deposited on glass were prepared from titanium alkoxide solution containing polyethylene glycol (PEG) by dip coating technique. 从含聚乙二醇的钛醇盐溶胶前驱体出发 ;通过浸渍提拉法在玻璃表面制备了锐钛矿型多孔TiO2 薄膜 .
The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
The preparation of nano porous tungsten oxide films has been reported using a sol-gel process with the starting tungsten powders together with the dip coating method. 以金属W粉为无机原料 ;采用溶胶 -凝胶技术 ;结合浸渍镀膜方法 ;制备出纳米多孔WO3薄膜 ;研究了热处理对薄膜性能的影响 .
The research in flux is mainly to change the original double hot dip coating technique, and change the first hot-dip galvanizing into electrolyzing flux. 对于助镀剂的研究主要是改变原有的双热浸镀工艺，改第一次热浸镀锌为电解助镀。
Homogeneous and transparent thin nanostructured titania films doped by Y3+were prepared on glass substrates by sol gel processing and dip coating technique. 用溶胶-凝胶法和浸渍-提拉法工艺,在玻璃表面上制备了均匀、透明的钇离子(Y3+)掺杂二氧化钛纳米薄膜。
With SnCl_45H_2O, (Sb_2O_3) and (Gd(NO_3)_3) as the raw material, the SnO_2/Sb DSA electrodes doped Gd were prepared by Dip coating method and sol-gel method. 分别采用浸渍法、溶胶-凝胶法;SnCl4.;5H2O;Sb2O3和Gd(NO3)3为原料;制备了稀土Gd掺杂SnO2/Sb涂层电催化电极
With carbon steel pretreated with flux, hot dip coating process and bimetal producing of ZAS35 alloy/carbon steel as well as bimetal interface characteristic were studied. 研究了经熔剂法预处理的碳钢热浸镀ZAS35锌合金工艺、ZAS35锌合金 /碳钢双金属制作工艺及双金属界面特性。
The TiO2 thin films from dip coating system were magnetron sputtered on with WOx,and can be activated by visible light in gaseous dimethyl benzene photocatalytic degradation. 采用磁控溅射技术在用浸渍提拉法制得的TiO2薄膜上;溅射氧化钨层;通过气相反应中光催化降解二甲苯的实验表明;WOx/TiO2薄膜具有可见光活性.
The TiO_2 nano thin film prepared by spin coating process is white, while the TiO_2 nano thin film made by dip coating process is colorless and transparent. 以TICl_4为通过旋转.;涂覆法制备的纳米TiO_2薄膜;表观为白色不透明膜;而以C_(16)H_(36)O_4Ti为前驱体选用浸渍-提拉法制备的薄膜为无色透明膜。