您要查找的是不是:
- Shedding Fault Diagnosis of Sprayed Plastic Coating 一次喷塑涂层脱落事故的分析
- BSP-1 flame spray gun (implement type) and thermal spray plastic powder is experimentally studied. 对BSP-1型火焰塑粉喷枪(改进型)及热喷涂用塑粉、工艺进行了研究。
- sprayed plastic coat 喷塑涂层
- A plastic coating repels moisture. 塑料涂层能防潮。
- The plastic coating is easy to apply on any surface. 塑性涂料容易涂在任何表面上。
- The anatase contents in P25, ST-41 and liquid flame sprayed TiO2 powders were 85%, 100% and 95%, respectively. P25粉末、ST-41粉末及液料火焰喷涂粉末中锐钛矿相含量分别为85%25、100%25和95%25。
- The cold end of the SER element is flame sprayed with aluminum for a distance of about two inches. 对冷端部进行喷铝是要保持大约两英寸的距离。
- Wear Resistance of the Flame Sprayed Carbide Coating 火焰喷涂碳化物涂层的耐磨性研究
- Try to find one with a plastic coated tip. 是否你不能找一是塑料的涂上一层的。
- Powder flame spray and spray fusig gun, with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder. 粉末火焰喷涂喷焊设备,配有各种粉末喷嘴,能喷涂金属微细粉末和氧化物涂层。
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉,能得到更佳涂层品质,也可喷涂氧化物涂层。
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects, and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉,能得到更佳涂层品质,也可喷涂氧化物涂层。
- A protective plastic coating that is placed over stored military or naval equipment. 塑料披盖一种塑料保护涂层,覆盖在备用的军用或海上设备上
- In order to enhance its wear resistance,the oxygen-ethyne flame spraying method was utilized to prepare the Co-based WC composite coating on the worn guide piece. 为提高导卫板的耐磨性,采用氧-乙炔火焰喷涂的方法在其磨损表面喷熔钴基WC涂层。
- Also applied to plastic coating,shoe crem dyestuff,transparent flash paint,and low-temperature baking finish. 还可以用于塑料喷涂、鞋油染料、透明闪光漆及低温烤漆等。
- Thecoating is made by using an oxy-acetylene flame spraying process. 涂层采用氧-乙炔火焰喷焊工艺制成。
- Many wrapping papers are not recyclable because of the shiny plastic coating on them. 包装纸是无法回收的,因为上面涂有一层发光的塑料涂层。
- In inertial confinement Fusion (ICF), plastic coating and doping plastic coating of microsphere substrates havea great number of uses. 在惯性约束聚变(ICF)中,微球表面覆盖塑料涂层和塑料掺杂涂层具有极大的使用价值。
- HX--40 Chenille cutting Machine Metal racks, plastic coating, integrate dusting, walking knife racks, stable operation and quality in yarn forming. 40锭, HX--40 雪尼尔绒纱机角铁机架,表面喷塑,集体吸尘,游动刀架,运转平稳,成纱质量稳定。
- The material are the high quality cold steeling rolling plate, surface processing with degrease, acid washing, phosphating , static spraying plastic. 材料采用优质冷轧钢板,表面处理采用脱脂、酸洗、磷化、静电喷塑。