您要查找的是不是：
- fixed end bending moment 固端弯矩
- Study on End Bending Moment of Transmission Line Vibration Induced by Wind 基于输电线弯曲风激振动的端部弯矩分析
- The fixed end moments acting on the member are ignored for the moment. 作用于该杆上的固端力矩暂且都不考虑。
- The actual stress is not proportional to the bending moment. 实际上应力与弯矩不成正比。
- But the bending moment at the central hinge must vanish. 但在中间铰处，弯矩必定为零。
- It should be noted that both end of the damper must have no additional bending moment when the structure moves, or it may cause damage to the dampers. 需要设计者注意的是，粘滞阻尼器的连接两端必须保证结构的运动不给阻尼器带来附加弯矩，否则可能造成阻尼器损坏。
- In order to transfer the bending moment at the end of the beam effectively,the stiffing plates should be planted at the column web while at the same hight with the beam flange. 为有效传递梁端弯矩,柱腹板梁上、下翼缘对应位置一般应设置加劲肋。
- In the calculation of fixed end moments, joints B and C are temporarily locked. 在计算固端弯矩时，临时锁住共点b和C。
- The induced bending moment may lead to destructibility of the pipeline. 弯矩的产生可能导致管线的破坏。
- Vibration and stability are investigated for an axially moving beam constrained by a pinned end and a fixed end. 摘要研究一端简支一端固支轴向运动梁的横向振动和稳定性。
- Shear force is implicit in the development of bending moments. 杆中的剪力在弯矩的推导中是不明显的。
- It operates to exclude recognition of everything except what squares up with the fixed end in view. 这种目的除了与固定目标相符的事物以外,其他事物概不承认。
- Another theory is that having a greater mass under the fixed end of the reed somehow improves the vibratory properties of the reed itself. 还有一个理论认为簧片固定端下面较大的质量会提升簧片的振动特性。
- This increases both the rigid body rotation of the vehicle and the bending moment. 这既增加了飞行器的刚体转动，也增加了弯矩。
- FLOW externally molded onto the body to indicate the fixed end containing a TFE seat. 流向)模铸在阀体的外部，表示配置TFE阀座的固定端口。
- In the FEM simulation of the loading identification process, the bending moment maintains a constant amplitude, hut its direction is alterable. 在有限元仿真计算中，弯矩载荷的大小保持不变，但方向可调。
- The unique phenomena at any cross section of EULER compressive bar under the zero bending moment is analyzed. 从理论上分析了欧拉压杆任意截面上弯矩为零的状态下所出现的奇异现象。
- Each microactuator consists of two PT arms that are jointed at the free end and connected to an anchor at the fixed end. 该微驱动器由两个光热膨胀臂构成，两者在自由端相互连接，而在固定端分别通过细桥与基底相连。
- In this paper a function calculation method of preloaded bending moment distribution for leaves of spring is des... 本文介绍了一种用于板簧簧片预加弯矩分配计算的函数计算法,并给出了计算实例。
- The needed pipe bending moment、wall thickness reduction and ovality of section are known by simulating. 通过模拟,计算管子弯曲变形所需的弯矩,计算管子弯曲部分外壁减薄率和椭圆度。
