您要查找的是不是：
- Finally, a good many factors that cause the error to the outcome of finite element analysis method are analyzed and discussed. 最后，对有限元分析结果产生误差的诸多因素进行了定性分析和讨论。
- By using Finite Element Analysis method, this paper investigates the influence of the radius of rounded root of rail bolt on the maxim axial tension. 应用有限元方法分析了钢轨螺栓螺纹根部圆孤半径对其最大轴向拉应力的影响。
- The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method. 本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响;
- Fluid flow and heat transfer of TIG welding arc and pool were analyzed based on built model with finite element analysis method. 采用等效比热法来确定液相分数,假定固液相等同区来解决工件熔化区与非熔化区的移动边界。
- In this paper, an analysis method of eigenvalue buckling of bottom-hole assembly is proposed based on finite element analysis, and some cases are analyzedand calculated. 以有限元分析为基础,对不同组合的下部钻具建立了特征值屈曲分析分法,在此基础上进行了实例计算。
- Method: The stress and strain in implant bone interface for implants with di fferent diameter (3.0 mm,3.75 mm and 5.0 mm), and with 1.47 N loading mesiodist ally were analyzed by 3 dimesion finite element analysis method. 方法 :用三维有限元方法给种植体施加 1.;47N(150 g)近远中方向的载荷;分别对直径为 3
- With the rapid development of computer, the Finite Element Method(FEM) becoming more and more important in engineering technology. Finite Element Analysis Method (FEAM) is now used most popularly in computer aid engineering (CAE). 随着计算机技术的飞速发展,有限元技术在工程技术行业发挥越来越重要的作用,有限元分析方法是当前计算机辅助工程中应用最为广泛的技术。
- Regarding multilayer base shake-isolation framework as research object, the influence of SSI effect on base isolated structure by means of the finite element analysis method is studied. 摘要以多层基础隔震框架为研究对象，利用有限元分析方法，研究地基-结构相互作用效应对基础隔震结构隔震效果的影响。
- Besides these,deck beam finite element analysis method can be applied flexibly to box girders with different cross-section or rib-plank structure and those without orthogonal support. 板段元法适用于其他断面形状的箱梁结构或肋板式结构,也可用于斜交箱形直梁的分析,具有较好的适用性。
- The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method. 用有限元法计算模拟了三角均匀分布侧面泵浦结构激光棒瞬态温升过程及稳态温度分布情况。
- Cheng X M, Chen H B.A new method to study the properties of aerostatic bearing--finite element analysis method under conformal transformation[J].Jourmal of Yuzhou University,1995,12 (3):11-16. [6]程雪梅;陈海斌.;一种研究空气静压轴承工作特性的新方法--保角变换下的有限元分析法[J]
- Abstract: The 5 degree-of-freedom(DOF)bearingless switched reluctance motor(BSRM)is presented,whose driving current are calculated by using the Finite Element Analysis Method based on ANSOFT. 摘 要： 提出了五自由度磁悬浮开关磁阻电动机通过使用有限元软件Ansoft来计算悬浮驱动电流的方法。
- The 5 degree-of-freedom(DOF)bearingless switched reluctance motor(BSRM)is presented,whose driving current are calculated by using the Finite Element Analysis Method based on ANSOFT. 提出了五自由度磁悬浮开关磁阻电动机通过使用有限元软件Ansoft来计算悬浮驱动电流的方法。
- Considering characteristics of Grotto Relics, the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed. 针对石窟文物的特点,阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
- Three finite element analysis methods are normally employed in the buckling analysis of engineering structures, which are eigenvalue method, geometry nonlinear method and geometry-material nonlinear method respectively. 摘要工程结构屈曲的有限元分析方法通常包括特征值分析、几何非线性分析和几何/材料双非线性分析三种方法。
- stochastic finite element analysis method 随机有限元方法
- the finite element analysis method 有限元分析
- Using experimental and finite element analysis methods, the effects of electrode forging force are investigated on residual stress and fatigue behavior of spot welded aluminum alloy joints. 采用试验和有限元分析相结合的方法,考察了锻压力对铝合金电阻点焊接头中残余应力和接头疲劳行为的影响。
- Finite Element Analysis Method for Welded Flitch Plate Structure 焊接贴板结构的有限元分析方法
- Application of finite element analysis method to metal die design 有限元分析在冲压模具设计中的应用
