您要查找的是不是：
- Energy Analysis on Explosion Welding Process 爆炸焊接过程的能量分析
- EXPLOSION WELDING AND HOT DUAL METAL 爆炸焊接与热双金属
- Copper-A3 Steel explosion welding 铜-A3钢爆炸焊
- Some applications are described in a new process of explosive welding for the superconducting materials. 综述了爆炸焊接新技术在超导材料焊接中的一些应用。
- Clad plate,which is made of titanium/steel, is tore in the edge of the plate during the process of explosives welding. 钛/钢复合板在爆炸焊接工艺中四周边角被撕裂现象严重,是爆炸焊接钛/钢复合板的难点之一。
- A dynamic model about the explosive welding of multilayer foils was given in this paper. 从冲击动力学原理出发。建立了多层薄膜爆炸焊接的动力学模型。
- To reduce the shock wave and save the explosive charge, the paper invents a new method of double vertical explosive welding by experiment. 摘要为了削减爆炸冲击波和节省装药量，该文通过试验发明了一种新的爆炸焊接方法-双立法。
- When explosive welding the big and thick stainless steel clad plate, there are some quality defects of small area melding in interface appeared random. 摘要爆炸焊接中厚不锈钢复合板时，板面容易随机产生小面积的界面熔化缺陷。
- This paper introduces the designing method and research result of explosive welding of copper-aluminium composite plate. 本文介绍了用爆炸焊接方法生产铜铝过渡板的设计方法与研究结果。
- The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition. 摘要爆炸焊接界面附近温升是由爆炸绝热压缩和畸形变形能沉积两者造成的。
- The explosion toppled the near chimney. 这次爆炸把不远处的烟筒炸倒了。
- Safety Assessment and Protection Measures for Explosion Welding 爆炸焊接的安全评估和安全防护措施
- The explosion gave forth a tremendous sound. 爆炸发出巨大的声响。
- According to the one dimension dispersion theory of explosive products,the range affected by the boundang effect in explosive welding is theoretically analyzed and calculated. 根据爆轰产物的一维飞散理论,对爆炸焊接中边界效应的影响范围在理论上进行了分析和计算;
- The results show that the strain at stagnation point is infinite, and stra in saltaion is completed in fivefold jet thickness at explosive welding interface. 计算结果表明,爆炸焊接驻点的应变为无穷大;在驻点附近5倍射流厚度范围内应变完成了突变。
- His hearing was impaired after the explosion. 爆炸后他的听力受到了损害。
- At least half of the explosive charge is saved because the dissipative energy of the shock wave is used in the parallel explosive welding and production cost are reduced greatly. 双立式爆炸焊接方法采用的是封闭式装药，因此待复合的双侧复合板削减了爆炸冲击波对周围环境的不利影响；
- The explosion tore a hole in the wall. 墙炸开一个洞。
- Explosive welding is a recency welding technology.In this paper, research and development of explosive welding technology have been reviewed and prospected. 爆炸焊接是一种崭新的焊接技术,对这种特殊的焊接技术的研究和发展进行了回顾和展望。
- The disfigurement of his face was caused by an explosion. 他面部的毁损是由于一次爆炸造成的。
