您要查找的是不是：
- Variety of end connection accessories are available to fit onsite requirements. 可提供多种连接附件,满足现场需要。
- Click End Connection, and then use the Display Mode control again to return the page to browse mode. 单击“结束连接”,然后再次使用“显示模式”控件使该页返回到浏览模式。
- For foot valve, replace inlet end connection with an F. V. screen housing assembly. 对于底阀，用一个F.;V
- Threaded end connection checks shall have an iron body and solder end connection checks shall have a bronze body. 螺纹连接端口的止回阀应该是铸铁阀体，焊接连接端口的止回阀则应该是青铜阀体。
- For compression end connection, first slide compression nut onto copper tube, then slide on ferrule. 对于压缩端口连接，首先将压缩螺母移动到铜管上，然后装上套圈。
- Standard IPS spigot connection fits slip-socket valve end connector. 标准国际管道标准IPS套管连接端口，适用于滑入式承插阀门端口连接件。
- Instructions are same regardless of valve end connections. 不管阀门的端口连接方式是什么,操作说明都相同。
- The UI presents users with an End Connection button to end the connection, and a Configure button (which represents the configure verb) to configure the connection. 该用户界面向用户提供一个用于结束连接的“结束连接”按钮,以及一个用于配置连接的“配置”按钮(该按钮表示配置谓词)。
- Loosen the valve union nuts and slide them back over the end connections. 松开阀门的管接头螺母，并将其滑回到端口连接件上。
- End connection including wall thickness of connecting pipe if weld end and any special flange facings or finishes. 连接方式,如果是焊接端口和任何法兰面或表面,则包括连接管道的壁厚。
- Visual observations showed that a horizontal displacement in the longitudinal direction of the bridge developed between the tie girder and the top flange of the floor beam at the end connection. 肉眼观察表明：在端节点处的系梁和横梁上翼缘之间产生一种沿桥梁纵向的水平位移。
- Notice that there is an End Connection button to disconnect the controls that are already connected, and a disabled Configure button. 注意,有一个用于断开已连接的控件的连接的“结束连接”按钮,以及一个禁用的“配置”按钮。
- The accident put an untimely end to the party. 意外事故使聚会匆匆结束了。
- The boys were itching for the lesson to end. 那些男孩子们渴望下课。
- Note that in the connection UI, an End Connection button appears; the connection has already been declared in the markup of the page, so the controls are already connected. 注意,连接用户界面中出现了一个“结束连接”按钮;因为已在页面的标记中声明了连接,所以控件已连接。
- Upper end connects with operation device and lower end connects with valve gate. 上端与执行机构连接,下端与阀门连接。
- Allows easy conversion of valve end connections due to system change, modification, or inadvertent misorder of product. 如果系统需要改变，修正，或者由于疏忽错订了产品，则采用这种套件能够轻易地转换阀门端口连接件。
- Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components. 注：PVC透明材质过滤器螺纹和法兰Y形过滤器的端口连接件是PVC灰材质部件。
- Valve assembly includes debris plug in valve socket end (to be removed on installation) and cable-tie affixed spare end connector. 阀门总成包括阀门承插连接端口内的碎片塞（安装时可拆卸）和电缆扎匝附带备用端口连接件。
- It's natural to slack2 off towards the end of a hard day's work. 一天紧张工作快结束的时候有些放松是自然的。
