您要查找的是不是：
- The springboard is made of an aluminium extrusion. 跳板是铝制的挤压板。
- Disc extrusion or extrude in 19 cases. 合并椎间盘碎裂或单纯椎间盘突出19例;
- Suitable for extrusion of thick-wall parts. 适用于厚壁零件的挤压。
- WUXI SUPERHUMAN GEAR COLD EXTRUSION CO., LTD. 无锡市神力齿轮冷挤有限公司。
- Hot forging, rolling, extrusion, etc. 热锻、滚轧、热压等等。
- THIRD LAY: POLYETHENE EXTRUSION LATERAL APPLIED. 第三层聚乙烯应用（侧向挤压？）
- Extrusion punches must be coated to prevent galling. 为防止磨损拉伸冲头必须做镀层处理。
- The springboard is made out of an aluminum extrusion. 跳板是铝制的挤压板。
- At the end of the blowoff period, a reverse procedure should be used. 在放气将要结束时，在进行相反的操作。
- The dough was formed into tubular grains by extrusion. 药团通过挤压而成管状药。
- To be responsible to accomplish Extrusion Powder LWR in time. 及时完成铝型材粉末实验室工作.
- USE: The set is used for compoud extrusion of tire tread. 用于轮胎胎面的复合挤出。
- Experienced with mechanical drawing and extrusion die design. 具备机械製图和挤出模具设计经验。
- BM ,MADDOCK, type screw are available for high quantity extrusion. 螺旋设计有 BM;MADDOCK 及高押出量供选用.
- The pressure behind this shock wave drives an inward-moving shock wave that heats the ejecta, seen as the aqua cloud. 激波后的压力驱使内行激波加热物质，也就是图中浅绿色的云团。
- The EPDM was vulcanized by reaction extrusion moulding. 采用反应挤出法对EPDM进行动态硫化。
- Irradiation crosslinking PE/PP foam sheet extrusion line. 电子线聚乙烯/聚丙烯成套生产线.
- The silver halide fibers were made by means of hot extrusion. 采用热挤压法成型制备出卤化银多晶光纤。
- There are more than 1500 plastic extrusion line made by S.W. 在国内外已有1500多条塑料挤出机生产线在运行。
- The expanding ejecta drive an outward-moving shock wave that races ahead of the ejecta into the interstellar gas (bright outer rim). 膨胀的抛出物驱动着外行激波，领先于抛出物冲入星际气体（明亮的外缘）。
