您要查找的是不是:
- desulfurization by sintering 烧结脱硫
- High-purity low Cordierite is produced by sintering. 应用烧结法成功地合成了高纯度低温堇青石。
- Study on Dust-collecting and Desulfurization by an Integrated Technology at The Bottom of a Chimney. 在烟囱底段完成除尘脱硫一体化工艺研究。
- The oxidation of sulfite is an important process in flue gas desulfurization by ammonia method. 摘要使用气体放电等离子体对较高浓度的亚硫酸钠进行氧化,在不同电压和频率条件下进行了实验。
- In the process of producing alumina by sintering, the most important technic is the calcination of aluminum. 在烧结法生产氧化铝的生产过程中,最重要的工艺是熟料的煅烧,它在回转窑中进行。
- The feasibility of applying fractal theory to desulfurization by activated carbon is analysed. 分析了应用分形理论来指导活性炭法脱硫的可能性。
- Diopside-based glass ceramic was made with steel slag and fly ash by sintering process. 以钢渣和粉煤灰为主要原料,采用烧结工艺,制得以透辉石为主晶相的微晶玻璃;
- Experimental study on aqueous catalyzed oxidation desulfurization by metal ions was carried out in detail. 对采用金属离子液相催化氧化脱硫进行了较详细的实验研究。
- Usually, layer and vertical crack are caused by moulding, and horizontal and reticulate crack are caused by sintering. 通常层裂和竖向裂纹是机压所致,横向裂纹和网状裂纹是烧成造成的。
- Fly ash haydite for environment engineering was prepared using fly ash blended with activation preparation by sintering craft. 粉煤灰陶粒是综合利用粉煤灰的一个重要途径。
- This paper presents the analysis to the experiment of coal desulfurization by microwave radiation with Mossbauer Spectroscopy. 采用穆斯堡尔谱学方法分析煤粉的微波脱硫效果。
- In addition, the technologies of desulfurization by extraction, complexation, catalytic cracking, alkylation, membrane separation and ionic liquids are described briefly. 简要介绍了萃取脱硫、络合脱硫、催化裂化脱硫、烷基化脱硫、膜分离脱硫及离子液体脱硫等技术;
- In order to increase output and quality of alumina produced by sintering process,Zhongzhou Branch,Chalco,adopted deep desilication process to raise A/S ratio. 中国铝业中州分公司为了提高烧结法氧化铝的产量和质量;采用深度脱硅.;艺提高精制铝酸钠溶液的硅量指数。
- Until now, many methods have been applied in the preparation of nanosized WC-Co powder, but it is difficult to get nanocrystalline WC-Co cermet by sintering. 但是迄今为止,研究者虽然可以通过各种方法制备纳米WC-Co粉末,却在烧结制备纳米晶WC-Co硬质合金方面遇到了很多困难。
- In application of the technology the deslagging conditions have been improved in the hot metal desulfurization by granular Magnesium. 透气砖;
- Supersonic profile cutting machine: This could cut all kinds of patterns and laces on the hot melting synthetic materials without scorch by sintering. 超音波辘花:在可热溶的合成面料上剪切出各种图案花边,同时烧结花边不甩毛。
- The clogging was mainly due to the attachment of oxide particles onto the inner surface of the submerged nozzle followed by sintering. 堵塞沉积主要是由于氧化物颗粒附着到浸入式水口耐火材料的内表面,继而烧结在一起所致。
- When compared with aqua ammonia liquid phase catalysis, it has also a marked superiority.Issues relevant to desulfurization by tanin extract are discussed by the writer. 该法与氨水液相催化法相比,也具有明显的优越性。
- The analysis of ultrasonic testing result indicated that main defects in the alloy were porosities likely caused by sintering thickness. 对检测结果的分析和验证表明,其内部主要为孔隙类缺陷,产生原因可能是烧结厚度太厚所致。
- The long afterglow luminescent material of Sr_2MgSi_2O_7 was prepared by sintering at high temperature under the deoxidization atmosphere. 首先,采用高温固相法,在还原气氛下制备出Sr_2MgSi_2O_7基长余辉发光材料。