您要查找的是不是：
- It concluded that deformation rate showed specific effect on the four textural parameters involved, but deformation degree had none. 结果表明,压缩程度对考察的四个质构参数有显著影响,压缩速率无显著影响。
- Study is made of the influence of the process of cold pressing and roughing followed by rolling ,of deformation degree and annealing on the structure and properties of Ta slabs. 以电子束熔炼的纯钽锭为原料,研究了冷压开坯然后进行轧制的工艺,以及加工变形量、退火工艺对钽板的组织与性能的影响。
- How deformation temperature,deformation degree and subsequent annealing way affect the microstructure of TC11 alloy by means of photographic detection is discussed. 文章采用金相跟踪法研究了变形温度、变形程度及随后的退火方式对TC11钛合金显微组织的影响。
- The effects of deformation temperature, strain rate, deformation degree, and initial austenite grain size on the static recrystallization behaviors were studied. 讨论变形温度、应变速率、变形程度与初始奥氏体晶粒尺寸对其静态再结晶行为的影响。
- The method of relationship between plastic deformation degree and grain size was put forward,when the thermos-deformation of metal was simulated by the thermos-torsion test. 提出了采用热扭转试验来模拟金属材料热变形时塑性变形程度与晶粒大小相互关系的方法。
- Thus the deformation of enclaves are modeled with physical process of the interaction between enclaves and their host magmas. As the result, the real ascent rate of the host magma with the field data about the size deformation degree can be determined. 因此，可用包体与岩浆相互作用的物理过程来模拟包体的变形特点，而反过来据实测的包体变形程度数据又可推算岩浆真实的上升速度
- We can only make progress by degrees. 我们只能逐渐地进步。
- The latitude of the island is 30 degrees north. 这个岛的纬度是北纬三十度。
- The thermometer reads 27 degrees. 温度计的读数是27度。
- The town is at longitude 24 degrees east. 这个镇位于东经二十四度。
- The gun has an elevation of 45 degrees. 这门炮的仰角为45度。
- Water freezes at 0 degrees Celsius. 水在摄氏零度结冰。
- He is getting better by degrees. 他身体在逐步好起来。
- The temperature is now minus 5 degrees. 现在气温为零下五度。
- The thermometer registered 70 degrees. 温度计显示七十度。
- Their friendship was growing by degrees into love. 他们的友谊正逐渐地发展成爱情。
- By degrees their friendship grew into love. 他们的友谊渐渐发展成爱情。
- It brought forwarded the method to synthetically analyze the deforming degree according to the two indices of comparative depth and section curtail rate. 提出了以相对深度和断面缩减率两个指标来综合分析锥形冷挤压件变形程度的方法。
- Concludes from the simulation results obtained with LS-DYNA3D software that the main reason for crackles in the part is the excessive deforming degree at the pre-forming stage. 利用LS-DYNA3D软件对一吨车前横梁的冲压成形过程进行了数值模拟;揭示了零件的开裂问题主要是由于零件在预成形阶段变形程度过大造成的.
- The temperature is 5 degrees centigrade. 温度是摄氏五度。
