该词条未找到_海词词典

您要查找的是不是：

The other host of signal are control signals. 另一组信号是控制信号。
The response of a terminal to remote control signals. 终端对远程控制信号的响应。参阅handshaking。
Expands the control signal for parallel steam generators. 使用并联的蒸汽炉时可用此配件扩大控制讯号。
For every lock head,each of its 2 substations is a reserve one to the other,but these two substations operate concurrently and only one substation has control signal output. 每个闸首的2个子站互为备用，且同时投入运行，运行时只有一个子站的控制信号输出。
A control signal. 一个控制信号。
Injector #2 output driver does not respond properly to the control signal. 喷嘴%232输出驱动器未对控制讯号作出正炒应。
Injector #output driver does not respond properly to the control signal. 喷油器%237输出驱动器没有正确地响应控制信号。
Design Of Programme - controlled Signal. 程控信号发生器的设计。
For checking the evaluation device a control signal can be generated. 通过产生一个控制信号来检查核定设备。
The main control cell adopt LPC936 singlechip, which offers the control signal. 其主控制单元采用LPC936单片机，提供控制信号。
Table 3-25 is a truth table of the 8251 bus control signals. 表3-25是8251总线控制信号的真值表。
A logic element designed to act as either an adder or a subtracter in accordance with the control signal applied to it. 根据供给它的控制信号,或起加法器作用或起减法器作用的一种逻辑元件。
It carries the micro-processor control signal or "interface signals". 它用以传递微处理机的控制信号（或称“接口信号”）。
A New Method Of Self-Learning and Revivification of Infrared Remote control Signal Based On Single Chip Microcomputer. 基于单片机的红外遥控信号自学习及还原新方法。
Using this information from the oxygen sensor and other inputs, the ECM generates a control signal to the carburetor. 根据氧传感器传递过来的信息及其它输入信号，ECM向化油器发出控制信号。
Call Accepted Signal A control signal transmitted by the called equipment to indicate that it accepts an incoming call. 呼叫接受的信号被叫设备发出的控制信号,表明正在接收入局呼叫。
The different control signal makes LBD to give out light with the pattern in different way. 不同的控制信号使发光二极管以不同的方式和花样显示。
A continuous input pulse train triggers the monostable circuit, and a control signal modulates the threshold voltage. 持续不断的脉冲输入，导致单稳态的电路产生, 同时控制信号调整门限电压。
In order to gate out the required control signals, pins have to be multiplexed. 为了给出所需要的控制信号，管腿必须采用多路转换。
A call control signal sent by the called DTE to indicate that it accepts the incoming call. 被呼数据终端设备（DTE）发送出来的一种呼叫控制信号，用以表示它接受呼叫方的呼叫。