该词条未找到_海词词典

您要查找的是不是：

Tests and researches are conducted for microstructure,residual stress,dislocation density and hardening principle of starlike inner race formed by cold closed die forging method. 针对经闭塞冷锻成型的星形套的组织、残余应力、位错密度及硬化规律进行了试验研究。
Study on Microstructure Residual Stress and Performance of Starlike Inner Race Produced by Cold Closed Die Forging 闭塞冷锻星形套的组织、残余应力及性能研究
Squeeze casting is descrbed as having a combination of the virtues of gravity die casting and closed die forging. 挤压铸造被认为兼具有压力铸造和合模俦造的优点。
Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible. 揭示了使用复动闭式模锻模具成形小锥角螺旋伞齿轮的可行性。
Based on the closed die forging process and the FEM simulation for the pole, the mould structure for precision alternator pole forging is designed. 在磁极的精密模锻生产工艺分析和有限元模拟基础上,设计了磁极精密模锻新工艺参数和新型的锻模结构。
As the Close die forging hammer is working in atrocious condition, its maximum intense part-anvil block must bear frequent shock and overload. 摘要模锻锤由于其特别恶劣的工作条件，其上最大的受力零件-砧座，会受到频繁的冲击和过载。
P.Skubisz, J.Sinczak, S.Bednarek, ”Forgeability of Mg-Al-Zn Magnesium Alloys in Hot and Warm Close Die Forging,” Journal of Materials Processing Technology, Vol.177, pp. 210-213, (2006). 何惠琳，“径向凸缘成形模具设计及相关参数影响之研究，”国立台湾科技大学机械制造组研究所博士论文，民国92年。
Multidirectional Closed Die Forging Set of Spiral Bevel Gear 螺旋伞齿轮复动闭式模锻模具
Keywords Closed die forging Die construction Diverter Forging die design; 闭式模锻;模具结构;分流器;锻模设计;
Keywords Spiral beval gear;Multidirectional closed die forging;Preformed blank;Die design; 关键词机械制造;复动闭式锻模;螺旋伞齿轮;模具设计;
DESIGN AND ANALYSIS OF SMALL-SCALED COMPLICATED STRUCTURAL PARTS OF TITANIUM ALLOY SHAPED BY ISOTHERMAL PRECISION CLOSED DIE FORGING 钛合金小型复杂结构件闭式等温精锻工艺设计分析
mechanics of closed die forging 闭模锻造力学
closed die forging of ring 环形件闭式模锻
closed die forging 闭模锻造
The main application range of die forging process on screw press are summarized. 本文总结了螺旋压力机模锻工艺技术的主要适用范围。
Abstract： Using the feature technique,a set of flashless die forging CAPP system for gear blanks is developed. 摘要：运用特征技术，开发了一套齿轮坯的闭式模锻CAPP系统。
The results have shown that the new way of precision die forging is very efficient. 结果表明，闭式精密模锻工艺的新方法是十分有效的。
This strain of wheat can grow during a cold spring. 这种小麦可以在寒冷的春天生长。
Using the feature technique,a set of flashless die forging CAPP system for gear blanks is developed. 运用特征技术,开发了一套齿轮坯的闭式模锻CAPP系统。
It has elaborated the advantages replacing open -die forging with flashless die forging technology. 阐述了用闭式模锻工艺代替开式模锻的优点。