该词条未找到_海词词典

您要查找的是不是：

biaxial flexural strength 双轴弯曲强度
The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed. 探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响。
The force used to break the bar is the flexural strength. 塑封料塑封后的小棒，用3点弯曲测试抗弯曲的强度。
For flexural strength test of cement specimen and other nonmetallic material. 用作水泥或其它非金属脆性材料试块的抗折强度测定。
The flexural strength of all FRC posts was tested with a 3-point bending test. 三点挠曲实验比较不同弯曲度的FRC弯钉与FRC直钉的挠曲强度和挠曲模量。
The flexural strength was determined by using the 4-point bending technique. 本研究以四点弯曲的方式量测挠曲强度。
The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper. 分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
biaxial flexural reinforced concrete beam 钢筋混凝土双向受弯梁
Flexural strength and elasticity decreased significantly with increasing wood content. 含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
biaxial flexural reinforced concrete beams 双向受弯钢筋混凝土梁
Flexural strength, flexural modulus and impact strength of CF/BPR composites increase with increasing CF content. 随着破纤维含量的增加，CF/BPR复合材料弯曲强度、弯曲模量和冲击强度均逐渐增加；
The material mechanical properties, such as flexural strength, are measured by three point bending techniques. 利用三点弯曲方法测定了材料的抗弯强度等力学性能。
The modified straw powder treated with Titanate coupling agent could increase the flexural strength of PVC sheet. 经钛酸酯偶联剂处理的改性秸秆粉能增强PVC板材的弯曲强度。
In the present paper the density of bodies beforeand after sintering as well as flexural strength were measured. 相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量。
With the rise of high silica glass fibers' content, the flexural strength and modulus of the composite increase. 随着高硅氧纤维含量的提高; 材料的弯曲强度及弯曲模量均明显提高.
The flexural strength and impactstrength of non-continuous long fibres reinforced phenolics toughen... 非连续长纤维增强塑料的弯曲强度、冲击强度优于短纤维增强塑料。
Both flexural strength and impact strength of FBZ/E laminate are more than 3 times FBZ laminate. FBZ/E层压板的弯曲强度和冲击强度都比FBZ层压板提高3倍多;
Zirconia ceramics used in all-ceramic restoration of prosthodontics has shown favorable biocompatibility, chemical stability, flexural strength and color property. 摘要氧化锆陶瓷作为口腔全瓷修复材料，在生物相容性、化学稳定性、抗弯曲强度和色泽等方面具有优势。
The bending experimental results show that the highest flexural strength of the joint at room temperature was acquired to be 13.6MPa. 弯曲实验结果表明;采用该工艺得到的接头最大弯曲强度为13.;6MPa。
The experiments included compressive strength, flexural strength, shear strength of sand grouts, stability and fluidity of net grouts. 试验内容包括砂浆的单压、抗弯、抗剪强度试验以及净浆稳定性和流动度试验。