您要查找的是不是：
- Using the programmable controller in the automobile rear axle house ring stiffener,logic sequential control was realized in the top plate automatic welding craft. 采用可编程控制器在汽车后桥壳加强环、后盖自动焊接工艺中实现逻辑顺序控制。
- Strength analysis of hydrobulging automobile rear axle housing 液压胀形汽车桥壳的强度及疲劳寿命分析
- automobile rear axle house 汽车后桥壳
- Keywords Hydroforming;Automobile rear axle housing;Numerical simulation;equilong-sinking;Loading path; 液压胀形;汽车后桥壳;数值模拟;双向等长缩径;加载路径;
- automobile rear axle housing 汽车后桥壳
- Rear Axle Housing Assy of Automobile 汽车后桥壳总成
- The strength, stiffness and mode shape of the rear axle housing was calculated via finite elemant methool (FEM). 根据计算结果分析，指出了其结构存在的缺点，提出了改进方案。
- The analytical findings provide some referential basis for the designof a rear axle housing structure. 研究结果为桥壳结构设计提供了一定依据。
- Strengthened Program Load Spectrum of Automobile Rear Axle 汽车后桥强化程序载荷谱
- In order to reduce gas hole defects in the rear axle housing castings,oddside venting system was used. 为解决汽车后桥外壳铸件存在的气孔缺陷,采了假型排气系统。
- Keywords automobile rear axle;gear;noise;rubbing grind; 汽车后桥;齿轮;噪声;研磨;
- Drilling machine for rear axle house flange 后桥壳法兰钻孔
- Threading machine for rear axle house flange 后桥壳法兰攻丝
- Aiming at laggard and low automatization degree of clearance measure method on axial assembly clearance between half shaft assembly and rear axle housing in automotive rear axle assembly, a new type clearanceometer was developed. 针对汽车后桥总成中半轴总成与后桥壳之间轴向装配间隙测量方法落后、动化程度差等问题,开发了汽车后桥总成装配间隙测量仪。
- The allowable strength, static strength, fatigue life and load-carrying capability of hydro-bulged rear axle housing in a 0.75 t truck are analyzed using FEA software ANSYS and the variation rule of its strength is obtained. 摘要以0.;75t货车液压胀形桥壳为例，利用有限元分析软件ANSYS对其许用强度、静强度、疲劳强度（寿命）及其承载能力进行分析，得到液压胀形桥壳强度的变化规律。
- Welding Properties of Thick Size Rear Axle Housing Steels for Automobile 厚规格汽车桥壳用钢的焊接性能
- Stamping technology optimization and springback analysis of cross member of automobile rear axle 汽车后桥横梁拉延工艺优化与回弹分析
- automobile rear axle 汽车后桥
- The rear axle carries the greatest weight. 后轴负荷最重的分量。
- Strength Analysis on Hydro-bulged Automotive Rear Axle Housing 液压胀形汽车桥壳强度分析
