您要查找的是不是：
- aqueous epoxy resin coating 水性环氧涂料
- Polyester film,inductive, epoxy resin coating. 聚乙酯膜，有感结构，环氧树脂包封。
- Epoxy resin coating creates excellent performance in humidity resistance, mechanical strength and heat resistance. 环氧树脂封装,从而具有优良的防潮性能、机械强度及耐热性。
- CL21 are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21为无感结构，用金属化聚酯膜为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- CL21X are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21X为无感结构，用金属化聚酯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- MPC are non-inductively wound with metallized Polyester dielectric/electrode and copper-clad steel leads with epoxy resin coating. MPC无电感性，用聚丙烯膜介质和铝箔绕制，用铜覆盖钢引线作电极，用环氧树脂作外被层，适合于长期稳定的高频电路。
- Are non-inductively wound with metallized polyester film as dielectric/electrode with copper-clad steel leads and epoxy resin coating. 为无感结构，用金属化聚酯膜作为电介质/电极绕制而成，导线采用镀锡铜包铜线，使用环氧树脂包封。
- CBB21 are non-inductively wound with metallized polypropylene film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CBB21为无感结构，用金属化聚丙烯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- Structure: Adopting two film with positive &no getive temperature coefficient of inter-compensation as dielectric, AL foil as electrode, unidirectional lead, epoxy resin coating. 结构：采用正、负温度系数互相补尝的两种薄膜作介质，铝箔作电极卷绕而成，单向引出，环氧树脂包封。
- PPS are non-indectively woud with Polypropylene dielectric and metallized Polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads and epoxy resin coating. PPS无电感性，用聚丙烯和金属聚丙烯膜与铝箔串联绕制，用铜镀层钢引线作电极，用环氧树脂作外包装，宜于高频和高脉动增长时间电路。
- PPS are non-inductively wound with polypropylene,dielectric and metallized polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads anf epoxy resin coating. PPS为非感应式,用聚丙烯电介质和镀金属聚丙烯薄膜串联以铝箔为电极绕制而成，导线采用镀锡铜包线，采用环氧树脂包封。
- Reaction with GMA and photoinitiator, UV-Curable waterborne epoxy resin coatings have been prepared. 在制备光固化水性环氧涂料的过程中，讨论了环氧开环和引入GMA的意义。
- PPN are non-indectively woud with Polypropylene film dielectric and aluminum foil electrodewith copper-clad steel leads and are epoxy resin coated. PPN无电感性，用聚丙烯膜介质和铝箔绕制，用铜覆盖钢引线作电极，用环氧树脂作外包装。
- PEI are inductively wound with polyester film dielectric and aluminum foil as the electrode with copper-clad steel leads and epoxy resin coated. PEI是感应式，用聚酯薄膜电介质和铝箔为电极绕制而成，导线采用镀锡铜包铜线，具有环氧树脂包封。
- CBB81 are non-inductively wound with polypropylene film as the dielectric and aluminum foil as the electrode with copper-clad steel leads and epoxy resin coated. CBB81为无感结构，用聚丙烯膜作为电介质和铝箔为电极卷绕而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- The epoxy resins coating has good properties, for example, high cured rates, good mechanical properties and moderate adhesion to a quartz substrate. 改性涂料具有固化迅速、机械性能好、与石英基质有良好的附着力等优点，又具有良好的柔顺性。
- curing agent for epoxy resin coating 环氧树脂漆固化剂
- thermosetting epoxy resin coating [化] 热固化环氧树脂涂料
- waterbome epoxy resin coating material 水性环氧树脂涂料
- Aqueous epoxy resin 水性环氧树脂
