您要查找的是不是：
- Positioning plate is usually used in fixing the place of anode plate and cathode plate in electrobath. 定位板主要是用来固定阳、阴极板在电解槽中的位置。
- Anode plate and cathode plate consist of grid checker(grid) made of special multicomponent lead-calcium alloy and activated substances. 阳极板及阴极板是由专用多元铅钙合金所作成的格子体（板栅）再加上活化物质所构成。
- An anode plate (14) is disposed to receive electrons emitted by the plurality of electron emitters (44), and includes an anode (26) designed to be connected to a potential source. 阳极板(14)被设置用于接收由多个电子发射器(44)发射的电子，并且包括设计成连接至电位源的阳极(26)。
- A stroke way for an EE type positive plate of the first and second electric field is adopted after the ESP of unit 1 boiler was reformed. 介绍了安徽洛河电厂1号机组电除尘器改造,其一、二电场采用EE型阳极板振打方式后的运行效果,对运行中出现的阳极板撕裂问题进行技术分析,并提出改进建议。
- The anode plate made of low Ag-Pb-Ca alloy is being applied into the production of EMM. It has advantages over the anode made of Ag-Sb-Pb alloy in lower cost, corrosion resistance and longer working time. 低银铅钙合金阳极板正在电解金属锰生产中推广使用,与银、锑、锡、铅四元合金阳极相比具有成本低、耐腐蚀、寿命长优点。
- This paper explains the principle of Ration Pouring control based on dynamic lost heavy method to Lead Anode Plate, The hardware constitution and the software design of control system is introduced. 采用动态失重法对铅阳极板浇铸进行定量控制,阐述了定量浇铸控制原理,介绍了系统的硬件组成及软件设计方法。
- Spot fork lift pocket add the fixing position plate. 点叉槽工位加装定位挡板。
- It comprises electrolytic membrane, silicon rubber seal gaskets, porous anode plate, and catalyst particles layer freely spread in the space between said electrolytic membrane and porous plate. 它包括电解质膜、硅橡胶密封圈、多孔阳极板，及在所述电解质膜和多孔板之间的自由铺放的方式形成的催化剂颗粒层。
- Using the traditional electrolysis refining technology, impurities contained in silver positive plate would affect the quality of pure silver product directly or indirectly. 采用传统的电解精练工艺,粗银所含杂质直接或间接地影响纯银产品的质量。
- The objective of pyrometallurgical process is to produce anode plates suitable for electrolysis. 火法精炼的目的是生产出符合电解工序要求的阳极板。
- A suit of fixing position plate for base structure clamp compact crossbeam. 底架夹具压紧梁定位挡块一套。
- Based on operation practice,the article summarizes some ways to improve qualification rate of anode plates in smelting workshop of Guixi Smelter. 本文通过对生产实践的总结从理论和实践两方面阐述贵冶熔炼车间提升阳极板合格率的一些方法。
- Aluminum Anode Plate for Lead-Acid Battery 铅蓄电池用铝极板的制备
- In actual car service of such batteries, the two outside positive plates were generally buckled and shorting through the adjacent separators. 这种蓄电池在实际车辆使用过程中，一般都是外面两片正极板翘曲，穿透相邻的隔板而造成短路。
- Cause analysis and dicussion of PCL in electric bicycle batteries(EB)and sulfate barrier layers formed on the positive plates are given in this paper. 对电动自行车用蓄电池容量早衰问题产生的原因、对正极板硫酸盐阻挡层形成的原因进行了分析和探讨。
- Adhesion between nickel deposit and decorative chromium deposit, decorative chromium deposit and hard chromium deposit was impr oved by strike plating, through rational arrangement of anode plate. 合理布置阳极板实现冲击镀以提高装饰铬层与镀镍层，硬铬层与装饰铬层间的密着性。
- Adding minium (Pb3O4)into the positive lead paste of VRLA battery can elevate the formation officiency of positive plates of battery. 在阀控铅蓄电池正极铅膏中添加铅丹可以提高正极板的化成效率。
- Besides defects occured during the production process of VRLA battery,the deterioration of positive plates is the main cause for the end of its life. 对于阀控式铅酸蓄电池而言,除了制造过程中产生的缺陷以外,正极板劣化是其寿命终止的主要原因之一。
- The body or plate to which the electrons are attracted is called the anode. 电子被吸引到其上面去的物体或薄板称为阳极。
- Other methods include alkaline formation of lead battery positive plates (Voss and Freundlich) and electrooxidation of lead acetate in an alkaline solution (Zaslavskii). 其他方法包括在碱性环境制备铅电池的正极和在碱性溶液中用醋酸铅进行电氧化。
