您要查找的是不是:
- angle of connecting rod 连杆摆动角
- The strength of connecting rod of diesel engine using for vehicle is analyzed through FEM. 应用有限元方法,以一台车用柴油机的连杆为例,对该机连杆的强度进行了分析。
- The deformation matrix method is a fast and available method to calculate surface deformation of connecting rod bearing bore. 变形(柔度)矩阵法计算连杆轴承孔表面变形快速、有效;
- Finally,the relationship between the motor voltage,pitch angle and the distorting angle of the connecting rod in the eight groups of curves are achieved by corresponcling to the angles and voltage. 利用采集电路将角度与电压实时地对应起来,得到了电机电压和桨距角及弹性连杆变形角度的八组关系曲线,并对得到角度的精度进行了分析。
- The result indicates the material not only meets need of connecting rod but also has low ductile fracture and good fracture joggle in definite condition. 结果表明,该材料不仅能够满足连杆的使用要求,在一定条件下还具有断裂低塑性及良好的断裂啮合定位性。
- Optimize the shock design of connect rod and crankshaft,improve the comfortable feeling greatly when you drive the motorcycle. 对曲轴连杆进行了震动优化设计,使整机的驾乘舒适性大大提高。
- In this paper, design and technology of the thin - wall rolling bush are discussed, and the bush of connecting rod of type X6110 diesel is developed. The testing results show that its characteristic and reliability accord with the demands of the diesel. 本文讨论了薄壁卷制衬套的设计与制造技术,所开发的X6ll0型柴油机连杆衬套的试验结果表明,设计的衬套工作可靠,能满足主机的要求。
- Piston-assembly friction measurement using IMEP (indicated mean effective pressure) method needs to exactly calculate the force of connecting rod and inertia force of the piston-assembly. 摘要用平均指示压力(IMEP)法测量内燃机活塞组的摩擦力,必须准确地分析计算连杆和活塞组惯性力。
- She hit her knee against the angle of the bed. 她的膝盖撞到床角上了。
- It is quite correct in measuring the bending strength of connecting rod journal fillet of most normal structure crankshafts,but for some special structure crankshaft,it can't obtain ideal results. 该试验台架对于大多数常规结构曲轴的连杆轴颈圆角疲劳强度的测定是比较准确的,但对于有些特殊结构曲轴的试验,却未能取得理想结果。
- Abstract: Piston-assembly friction measurement using IMEP (indicated mean effective pressure) method needs to exactly calculate the force of connecting rod and inertia force of the piston-assembly. 摘要: 用IMEP(平均指示压力)法测量内燃机活塞组的摩擦力,必须准确地分析计算连杆和活塞组惯性力。
- This paper introduces a new multiple turret strong force sand belt grinding machine.An example for application of strong force sand belt grinding in machining of connecting rod is expounded. 介绍了一种新型的多头强力转台砂带磨床,阐述了强力砂带磨削工艺在连杆加工中的应用实例。
- The earth's axis is titled at an angle of about 231. 地轴倾斜成约二百三十一度角。
- Broaching of Connecting Rod Mating Surface Groove 连杆结合面凹凸槽的拉削加工
- The connecting rod actuates the driving wheels of a locomotive. 连杆激活铁路机车的传动轮
- The angles of a triangle total 180. 三角形的三角之和等于180°。
- The lower end of the connecting rod fits the crankshaft journal. 在连杆大头安装曲柄轴颈。
- The two roads lie at an angle of about45 degrees. 这两条路交叉成45度角。
- The angle of projection affects the answer. 抛射角对结果有影响。
- The two roads lie at an angle of about 45 degrees. 这两条路交叉成45度角。