您要查找的是不是:
- Submarine Water Reactor 潜艇水反应堆
- Based on the Russian Akula-I class submarine, it is powered by a single pressurised water reactor which was developed at the Indira Gandhi Centre for Atomic Research at Kalpakkam, Tamil Nadu. 该潜艇是在俄罗斯阿库拉级I型核潜艇的基础上建造而成,由单一压水反应堆提供动力,该反应堆由位于泰米尔纳德邦卡尔巴卡姆的印度甘地原子研究中心(IGCAR)开发。
- Two boiling water reactor (BWR) are selected in the analytical works. 同时,探讨功率提升后运转条件改变对薄化位置的影响。
- The submarine water main is to laid across the Victoria Harbour from West Kowloon to Sai Ying Pun . See Figure 1 attached to this Permit. 海底供水管道横越维多利亚港,由西九龙敷设至西营盘。参看图1。
- Trench excavation by grab dredger and install a submarine water main of 1200 mm diameter and a length of 2.1 km. The total dredged volume of marine sediment is about 362,000 m3. 工程主要涉及以抓斗挖掘管槽,敷设一条直径1200毫米和长度2.;1公里的海底供水管道。挖出的沉积物总体积估计约达362;000立方米。
- Thereare many differences between CANDU and a pressurized water reactor instructure. CANDU 堆相比一般的压水堆在设计上有显著的区别。
- It becomes the kernel code in the light water reactor (LWR) physics design and nuclear fuel management calculations. 基准计算表明,该程序精度高、速度快,成为水堆堆芯物理设计和燃料管理计算的核心程序。
- The Columbia Generating Station is a 1,150-megawatt BWR (boiling water reactor) facility. 哥伦比亚发电站是一个1,150兆瓦BWR工厂。
- A new method is provided for the determination of the photoneutron background source in Heavy Water Reactor. 此外,我们还从对正常运行状态下的实时反应性值的统计分析得到了光激中子源本底的大小,为确定重水堆光激中子源大小提供了一个新的方法。
- The pressurizer is a very important device which controls the system pressure in a pressurized water reactor(PWR). 稳压器在压水堆一回路发挥着重要作用,它对一回路压力进行保护和控制。
- Abstract This paper proposes a multi-layer design of fuel assemblies for the fast zone of the SCWR (supercritical water reactor) mixed core. 摘要 提出超临界水混合堆快谱区多层燃料组件设计方案。
- Typical examples are the flows in the T-junction and the pressurizer in the cooling system of Pressurized Water Reactor. 典型的例子如在压水反应堆核电厂主系统中的三通构件以及稳压器内的波动接管等构件中,射流与主流具有很大的温差,这就会造成在非连续的射流与主流的混合过程中,构件承受着巨大的热冲击,有可能使构件产生热疲劳破坏。
- The current status and technology of interim spent fuel dry storage facility are briefly introduced for Pressurized Heavy Water Reactor(PHWR)Nuclear Power Plant(NPP). 本文概要介绍重水堆核电厂乏燃料干式中间贮存的现状和技术,同时,提出秦山三期重水堆核电厂采用乏燃料干式中间贮存技术的初步设想。
- After having completed the model analysis of the pressurized water reactor (PWR) core barrel in an l:10 model, the dynamic characteristics are obtained. 在反应堆1:10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验,获得动态特性。
- Like the Type 091, the Type 092 is powered by a nuclear, turbo-electric arrangement, consisting of one pressurised water reactor (PWR) rated at 90MW, with one shaft. 像091型,092型由核、涡轮-电动配置提供动力,包括一组额定功率90 兆瓦的压水反应堆(PWR)组成,采用单轴。
- The San Men Nuclear Power Project will install 6 set of million Kw pressurized water reactor nuclear power units that will be programming by one time and constructed by stages. 三门核电项目规划建造6台百万千瓦级压水堆核电机组,一次规划、分期建设。
- They are building a submarine cable tunnel. 他们正在建设一条海底电缆隧道。
- This destroyer can overrun any submarine. 这艘驱逐舰的速度比任何潜水艇都快。
- The vessel was ruined by a submarine. 那艘船是被潜水艇毁坏的。
- In order to perform the start-up of pressurized water reactor (PWR) for 300 MWe Qinshan Nuclear Power Plant, a pair of " primary" source rods with 210Po-Be neutron sources were made successfully. 为了实施秦山300MWe核电站压水堆的启动,成功地制造了一对~(210)Po-Be首次启动中子源棒。