您要查找的是不是:
- steering knuckle tie rod ball joint 转向关节横拉杆球节,转向节横拉杆球节
- steering knuckle tie rod ball seat 转向关节系杆球座
- steering knuckle tie rod ball 转向关节系杆球端,转向节系杆球端
- On single-ended output's gear rack type diverter, a rack's end with changes the steering knuckle tie rod through the inside and outside bracket to be connected. 在单端输出的齿轮齿条式转向器上,齿条的一端通过内外托架与转向横拉杆相连。
- steering knuckle tie rod end assy 转向关节横拉杆接头总成,转向节横拉杆接头总成
- steering knuckle tie rod end pressure lubricator 转向(关)节横拉杆接头油嘴
- steering knuckle tie rod 转向节系杆,横拉杆
- steering knuckle tie rod end 转向关节系杆端,转向节系杆端
- steering knuckle tie rod plug 转向节系杆端塞
- steering knuckle tie rod spring 转向节系杆弹簧,转向关节系杆弹簧
- steering knuckle tie rod yoke 转向横拉杆轭
- It consists of steering wheel, steering shaft, worm, gear sector, pitman arm drag link, steering knuckle arm, king pin, steering arms, tie rod, front axle and steering knuckle. 转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
- Tie Rod End To Steering Knuckle Nut 转向拉杆端与转向关节螺栓
- The mechanism consists of a steering gear box, pitman arm, drag kink, tie rods, steering arms, and steering knuckles, the latter supporting the front wheels. 该机构由转向器,转向垂臂,纵拉杆,转向横拉杆,梯形臂和转向节构成,转向节支承着前轮。
- "It consists of steering wheel, steering shaft, worm, gear sector, pitman arm drag link, steering knuckle arm, king pin, steering arms, tie rod, front axle and steering knuckle." 转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
- Remove the steering knuckle from the strut. 自支柱拆除转向关节。
- tie rod ball 连杆球端
- "The steering knuckle then supported through Ball joints, by upper and lower control arms which are attached to the car frame. 转向节通过球头节与安装在车架上的上下控制臂相连。
- Route sensor wire from steering knuckle to fender panel. 从转向节到防护板安排感知器导线走向。
- During steering maneuvers, the strut and the steering knuckle (through the ball joint and a pivot bearing in the strut's upper retainer) turn as an assembly. 车辆转向时,支柱以及转向关节(经由球形接头与上支柱固定器之轮毂轴承)会一体旋转。