您要查找的是不是:
- Microstructure and phase structure of light beam cladding layer with iron based self fluxing alloy powder were studied by SEM,EDS,X ray diffraction,microhardness and Rockwell hardness. 采用SEM、EDS、X射线衍射及显微硬度和洛氏硬度分析手段研究了铁基自熔合金粉末光束熔覆层的微观组织及其物相组成。
- Keywords Wear;Alloy coating;Surface treatment;Cobalt base self fluxing alloy; 关键词磨损:合金涂层;表面处理;钴基自熔合金;
- Keywords light beam cladding;microstructure;strengthening mechanism;iron based self fluxing alloy powder; 光束熔覆;微观组织;强化机制;铁基自熔合金粉末;
- This paper describes material,equipment and processing of high frequency induction remelting technology for self fluxed alloy coating. 本文介绍了自熔合金涂层高频感应重熔工艺技术的设备、材料、工艺和应用效果。
- Keywords coating;self fluxed alloy;high frequency induction heating;remelting; 涂层;自熔合金;高频感应加热;重熔工艺;
- Keywords self fluxing alloy coating;furnace fusing;bond mechanism; 自熔合金涂层;炉内重熔;涂层结合机理;
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The high-temperature plasma entered through the breach and melted the supporting materials such as Al alloy and Fe,Ni base alloy, which result in the space shuttle Colum... 对于航空、航天与核动力领域中广泛采用的通用关键材料,应该加强其制备工艺的研究,特别是可视化铸造技术的研究。
- Furthermore, a kind of ANN based self learnable instrument are suggested. 同时,还进一步介绍了由此而产生的具有学习能力的仪表。
- The chemical compositions,physical performance,mechanical performance,corrosion performance of high Cr Ni base hastelloy G 30 alloy were studied,and its performance was analysed with application. 评述了高铬镍基哈氏合金G?30的化学成分、力学性能、耐蚀性能及冷热加工性能,并结合使用情况分析了它的应用前景。
- A coating of Stellite Ni60 material,which is a commercial nickel base self melting alloy powder,was melting plated on Q235 steel surface by using thermal plasma arc. Corrosion resistance of the melting plated coating was investigated. 用热等离子弧在Q 235钢基体表面熔覆材料为Stellite N i60商用镍基自熔性合金粉的涂层,涂层厚1 mm。
- In this paper, based on the eight functional elements of RMS based self configuration flexible manufacturing system (CMC ) is presented. 本文在分析构成可重组制造系统的8项功能要素的基础上,提出了基于组态式柔性制造单元(CMC)组成的阵列式布局的可重组制造系统的创新结构体系。
- The effect of inverted two-stage aging on microstructure and properties of a Ni base superalloy has been studied. 研究了固溶+两段时效热处理工艺对镍基高温合金组织及性能的影响。
- The wear-resistant dispersion-eleetroplated layer is composed of high-hardness particles distributed on a Ni base. 耐磨分散电镀可以赋予零件表面以镍基体上分布着高硬度微粒的镀层,从而有效地提高耐磨性。
- They give into their baser self much faster than men, wittingly or unwittingly. 她们比男性更快接受卑劣的自我。
- A Ni base superalloy columnar preform were produced through nitrogen spray atomization and deposition. 利用氮气雾化喷射沉积技术成功地获得了宇航用变形镍基高温合金柱形坯。
- The dendritic morphologies of a Ni base single crystal superalloy in , and orientations were observed by optic microscope. 用光学显微镜观察了沿 [0 0 1],[0 11]和 [111]方向生长的镍基单晶高温合金的枝晶形态。
- The wear test of Ni based alloy-Cr/WC composite coating without lubrication is carried on a MM-200 pin-on disc wear tester and study wear-resisting property. 在MM-200型销盘式磨擦磨损实验机上,对Ni基Cr/WC复合涂层进行了无润滑的干磨擦磨损试验,研究其磨损特性。
- The multilayered composite of Ni Zn ferrite composite paint, PZT paint, tetrapod like Zinc Oxide whisker paint with Ni based paint have been studied in this paper. 涂层结构及厚度直接影响所制备涂料的屏蔽效能。
- Surface grain refinement of turbine blades in Ni based superalloy K18 were studied by comparison of experimental results in different alloys and mold surface materials. 选用K18合金和纯金属镍及不同的面层细化料,通过实验对比研究了镍基高温合金叶片表面晶粒细化机理。