您要查找的是不是:
- The wear test of Ni based alloy-Cr/WC composite coating without lubrication is carried on a MM-200 pin-on disc wear tester and study wear-resisting property. 在MM-200型销盘式磨擦磨损实验机上,对Ni基Cr/WC复合涂层进行了无润滑的干磨擦磨损试验,研究其磨损特性。
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The multilayered composite of Ni Zn ferrite composite paint, PZT paint, tetrapod like Zinc Oxide whisker paint with Ni based paint have been studied in this paper. 涂层结构及厚度直接影响所制备涂料的屏蔽效能。
- Abstract: Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating m ad e by a vacuum fusion sintering method are discussed in this paper. 摘 要: 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The effect of inverted two-stage aging on microstructure and properties of a Ni base superalloy has been studied. 研究了固溶+两段时效热处理工艺对镍基高温合金组织及性能的影响。
- The wear-resistant dispersion-eleetroplated layer is composed of high-hardness particles distributed on a Ni base. 耐磨分散电镀可以赋予零件表面以镍基体上分布着高硬度微粒的镀层,从而有效地提高耐磨性。
- A Ni base superalloy columnar preform were produced through nitrogen spray atomization and deposition. 利用氮气雾化喷射沉积技术成功地获得了宇航用变形镍基高温合金柱形坯。
- The aluminium based composite reinforced by alumina Borate Whisker was prepared by squeeze casting method. 本文利用挤压铸造法成功地制备了硼酸铝晶须增强铝复合材料。
- Agueous emulsifiable isocyanate adhesive is one of important adhesive researches for wood based composite. 异氰酸酯水乳液胶粘剂是木质复合材料胶粘剂研究和开发的热点之一。
- The dendritic morphologies of a Ni base single crystal superalloy in , and orientations were observed by optic microscope. 用光学显微镜观察了沿 [0 0 1],[0 11]和 [111]方向生长的镍基单晶高温合金的枝晶形态。
- The mechanical properties of the toughened UPR 298# based composite was introduced at the end of this paper. 最后探讨了增韧298%23树脂对其复合材料力学性能的影响。
- Surface grain refinement of turbine blades in Ni based superalloy K18 were studied by comparison of experimental results in different alloys and mold surface materials. 选用K18合金和纯金属镍及不同的面层细化料,通过实验对比研究了镍基高温合金叶片表面晶粒细化机理。
- A series of contrastive experiments on the cobalt based composite coatings and the 45 hardened steel are fulfilled by a pin-on-disc abrasion machine. 应用盘销式摩擦磨损试验机对复合涂层材料和淬火态 45钢进行了磨损对比试验。
- Typical application: Co-WC powder, chrome oxide powder, Lead sesquioxide powder, Chromium carbide powder, zirconium oxide powder, Ni Base Alloy-Chromium Carbide,etc. 典型应用:钴碳化钨粉、氧化铬粉、三氧化二铅粉、碳化铬粉、氧化锆粉、镍铬碳化铬粉、钴铬铌钇粉等。
- AbstractProgress in research on cast Al base composite enhanced by grain has been introduced. 介绍了铸造法制备颗粒增强铝基复合材料研究的进展情况;
- The high-temperature plasma entered through the breach and melted the supporting materials such as Al alloy and Fe,Ni base alloy, which result in the space shuttle Colum... 对于航空、航天与核动力领域中广泛采用的通用关键材料,应该加强其制备工艺的研究,特别是可视化铸造技术的研究。
- In this paper, recent advances in research and applications of chitosan based composite materials are reviewed for bone repaire and tissue engineering incl... 综述了壳聚糖类复合材料在骨填充修复材料、骨组织工程和软骨组织工程方面应用的状况及前景。
- Ni base alloy/WC composite coating 镍基合金/WC复合涂层
- The hardness of Cu base composite is much higher than that of pure capper.The improve of mechanical properties is due to the block of dislocation by dispersion of alumina. 且铜基复合材料硬度值比纯铜高出许多,显示氧化铝的均匀散布能有效阻碍差排的滑移,提升其机械性质。
- The chemical compositions,physical performance,mechanical performance,corrosion performance of high Cr Ni base hastelloy G 30 alloy were studied,and its performance was analysed with application. 评述了高铬镍基哈氏合金G?30的化学成分、力学性能、耐蚀性能及冷热加工性能,并结合使用情况分析了它的应用前景。