该词条未找到_海词词典

您要查找的是不是：

FEM contact analysis model 有限元接触分析
A tooth contact analysis model with a rotating freedom was developed by coupling freedom method to determine the stress and strain field of gears. 摘要利用自由度耦合方法建立了县有旋转自由度的齿轮接触模型，用以分析齿轮的应力应变场。
FEM contact analysis 有限元接触分析
In this paper a FEM analysis model of cable-truss deployable antenna is proposed according to the special requirements for spaceborne antenna. 摘要针对太空索网桁架式可展开天线的结构特点和性能要求建立了天线的有限元分析模型，并对其结构进行了优化设计研究。
Therefore, it needs to establish the buckle to hang the system the non-linear finite element analysis model of cable-stayed system in the FEM of structure . 在进行有限元结构分析时,需要建立扣挂系统的非线性有限元分析模型。
By using a dynamic contact analysis,a finite element model is developed to calculate the response of composite laminates to low velocity impact.A numerical example is given. 利用动力接触分析方法模拟冲击的接触行为，提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
Analysis Model of Fabrics on Impact Force when Airbag Inflates at High Speed. 安全气囊高速膨胀时冲击力分析模型。
After the proper backlash is achieved, perform the Gear Contact Analysis procedure. 在得到合适的齿隙后，执行齿轮接触分析程序。
It was composed of description model DWF_net and analysis model AWF_net. 该模型由工作流描述模型和工作流分析模型组成。
A reliable, feasible finite element analysis model for multi-pin-hole connected structure with multi-cracks was established with contact between pin and the conjunctional structure. 文中运用考虑销钉与结构板件间接触的有限元分析方法，建立合理的计算模型，为多孔多裂纹裂尖应力强度因子提供可靠、可行的分析途径。
Parameterized solidmodeling for the TI worm drive is achieved.Tooth contact analysis is developed forthe TI worm gearing with assembly errors. 实现了TI蜗杆传动的三维参数化设计,对含有装配误差的TI蜗杆传动的啮合接触情况进行了分析。
The computational models for tooth contact analysis (TCA) and loaded tooth contact analysis (LTCA) of the face gears were established. 建立了直齿面齿轮副轮齿接触分析(TCA)和承载接触分析(LTCA)的计算模型。
Aiming at the problem of incline of lintel in warm extrusion forming process for copper alloy solid bearing retainer, the rigid-plastic FEM analysis models have been setup and numerical simulation and analysis been made, improving measures put forward. 摘要针对轴承保持架温挤压成形中出现的过梁倾斜等问题，建立了刚塑性有限元模型，对温挤压成形过程进行数值模拟，并提出了相应的改进措施。
CAE is conducted on main parts of a mining truck brake, which includes structural static analysis, non-linear contact analysis, modal analysis and transient dynamic analysis. 摘要对矿用汽车制动器主要部件进行了计算机辅助工程分析(CAE)，包括：结构静力学分析、非线性接触分析、模态分析、瞬态动力学分析等。
A new network vulnerability analysis model is given by use of layered analysis in this paper. 摘要在被动网络节点脆弱性分析方法的基础上提出了一种新的基于主动攻击的网络脆弱性分析模型。
Z.Q.Gong, K.Komvopoulos, “Mechanical and Thermomechanical Elastic-Plastic Contact Analysis of Layered Media With Patterned Surfaces.” J.Tribol, Vol.126, PP.9-17, 2004. 徐泽志、曹智强“人工关节垫片表面特徵的磨耗分析”元智大学机械工程研究所硕士论文，2005。
To predict the rail s noise radiation, the receptance analysis model of the track system is built in this thesis. 为了预测钢轨辐射的滚动噪声,本文建立了轨道系统模型计算钢轨的导纳,在模型中,钢轨采用三维实体单元模拟,轨枕采用弹性梁单元模拟。
On the basis of the first envelope ,the paper stresses on the tooth contact analysis of the second envelope,and the equations of a worm and a wormwheel flanks are derived . 本文在第一次包络的基础上，着重进行了二次包络齿面接触分析，推导出了蜗杆和蜗轮齿面方程。
The system includes data pretreatment, pre-sell analysis and forecasting analysis model . 其系统设计包括数据预处理、售分析及预测分析模块设计。
The fundamental causes of the frame getting stuck are found out through the finite element contact analysis on gyrating framework of aircraft launching frame. 通过对飞机回转弹射机构的有限元接触分析,找到了机构卡死的根本原因:一方面,过大应力使锥形筒体产生过大塑性变形;