您要查找的是不是：
- Diameter of shot sleeve mm 压铸室直径
- The cylinder diameter of raceway center(mm. －滚道中心圆直径(mm)
- The diameter of the tree-trunk is about 2 meters. 这树干的直径大约是2米。
- The type of group life, the Hydra diameter of 1-3 mm. 群体生活的种类，其水螅体直径1至3毫米。
- Our battery fired off many rounds of shot at the enemy. 我们的炮兵连向敌人发射了许多发炮弹。
- Measure the diameter of this circle. 量一下这圆的直径。
- We must gauge the diameter of wire first. 我们必须先测量电线的直径。
- The pond has a diameter of three hundred metres. 这池塘直径有三百米。
- Win the point with a volley in a rally of shot. 攻略要点:用扣杀得分。
- Its diameter was 6.5 mm and diameter of bore center was 2.1 mm. 中空拉力螺纹钉螺纹直径6.;5mm;中心孔直径2
- The battery fired off six rounds of shot. 炮兵发射了6发炮弹。
- The pond has a diameter of 2 hundred meters. 这池塘直径有两百米。
- The interior diameter of a hole,tube,or cylinder. 内径洞、管或圆柱体的内径
- Must gauge the diameter of wire first. 我们必须先测量电线的直径。
- Abstract: Porosity of die castings caused by air entrapped into the liquid metal in the shot sleeve is common problem of die csating process. 文摘:压室中气体卷入金属液内而造成压铸件内部气孔是压铸过程常见的问题。
- Measure the inner and outer diameter of big pipe. 用于测量大口径长钢管的内外径测量。
- This should not be confused with measurements of shoot elongation. 该情况不应与枝梢延伸测定混为一谈。
- The air entrapment of the liquid metal flow in the shot sleeve during the slow shot phase is one of the factors resulting in this kind of defect. 气孔是压铸生产中的常见问题,导致这一缺陷的原因之一就是在慢压射过程中压室内的金属液流动卷入了气体。
- What is diameter of circle provided? 着陆区直径?
- The circle has a diameter of 6 inches. 这个圆直径六英寸。
